Kiln measuring electrodes
For supervising the moisture
content
during the drying process.
Two drive-in
heads with measuring points of different
length for moisture gradient measurements,
with two electrode connecting cords of
16 ½ ft (5m) each, are resistant to
temperatures of from – 40 ° C to + 250° C
(-40° F to + 480° F0, resistant to oils
and ozone with AB
plugs.
Compressed air penetrating point electrode
This electrode automates the measuring
function of the hammer electrode.
The electrode points can be forced into wood
of any hardness over their entire length.
Effortless operation by means of a foot valve
frees both hands and permits measurements
to be made in rapid succession. The electrode
can be connected to all AQUA-BOY timber
moisture meters. The required operating
pressure is 6 bars. Higher pressures are
relieved by the built-in relief valve and will
thus cause no harm.